The RhinoJR RJR110 is a cast aluminum-constructed removable drive enclosure designed for mounting any 3.5" form factor, low-profile (1") SCSI, Serial ATA (SATA) or Parallel ATA (PATA) drive into a 5.25" half-height peripheral bay.
Promise SuperSwap 4600 is a 4-bay, internal hot-swappable drive enclosure designed for desktop and tower servers. The drive enclosure supports SAS/SATA data transfer rates of up to 3Gb/s and is also backwards compatible with SATA/SATA II 1.5Gb/s disk drives. In addition to 3.5" disk drives, SuperSwa ...
More
Full aluminum built cooling body constructed to fit five drives within a three (5.25”) bay fitting, the MB455 Series follows the tradition of industrial systems' needs for stability, durability, toughness and high sensitivities for mass storage operating conditions. It's equipped with a hot swappabl ...
More
HP internal Two Bay Hot Plug Wide Ultra2/Ultra3 SCSI Drive Cage increases internal hot Pluggable storage capacity and allows separation of boot and OS hard drives or hot plug tape to run on a separate channel from data drives.
Looking to add more drives to your perforated performer? Out of the box, your Power Mac G5 provides mounting support for only two hard drives (and one slot is already occupied), so if your needs are limited, that might work out just fine But, what if you need more storage space than two drives can m ...
More
Full aluminum built cooling body constructed to fit three drives within a two (5.25”) bay fitting, the MB453 Series follows the tradition of industrial systems' needs for stability, durability, toughness and high sensitivities for mass storage operating conditions. It's equipped with a hot swappable ...
More
The Data Express DE100 is a steel-constructed removable drive enclosure for mounting 3.5" form factor, half-height (1.6") or low-profile (1") SCSI or Parallel ATA (PATA, or IDE) drives into 5.25" half-height peripheral bays.
The Data Express DE110 is a rugged drive carrier and receiving frame for internally mounting a low-profile (up to 1" high), 3.5" form factor IDE drive into any standard half-height, 5.25" peripheral bay.
The RhinoJR RJR110 is a cast aluminum-constructed removable drive enclosure designed for mounting any 3.5" form factor, low-profile (1") SCSI, Serial ATA (SATA) or Parallel ATA (PATA) drive into a 5.25" half-height peripheral bay.