Home → Top Products → Amplifiers and Preamps
Top products for: Amplifiers and Preamps
 |
1 -AudioSource AMP-100 2-Channel Amplifier 50 watts power amplified for multiple custom home audio distribution. 2 independent channels rated at 50 watts.100 watts bridged mono.A/B speaker selector.Independent volume and balance front panel controls.Second line input with priority override.Mono and auto-on (signal sensing) switches. 
3 reviews
|
 |
2 -Onkyo M-282 2-Channel Amplifier Ideal for THX Surround EX and multiroom/multichannel systems, the M-282 has got to be the best upgrade value in the home-theater world. Everything you need in an additional amp is here, including Onkyo's WRAT to maximize signal accuracy. 
4 reviews
|
 |
3 -Crown XTi 2000 2-Channel Amplifier The XTi Series of Crown amplifiers are professional tools designed and built for portable PA applications. The series includes three models which are identical except for output power: XTi 1000, 2000 and 4000. All are rugged and lightweight, and offer unmatched value in their class. 0 reviews |
 |
4 -Onkyo A-9555 2-Channel Amplifier With the A-9555 integrated digital amplifier, sound quality takes precedence over all else. By using Onkyo’s Vector Linear (VL) Digital technology to remove any spike noise before it introduces errors into the inversion timing, it is possible to get a highly accurate analog-to-digital conversion. 0 reviews |
 |
5 -Sonance HFW-CA308 Amplifier Frequency Response: 20 Hz - 20000 kHz... 0 reviews |
 |
6 -AudioSource Amp One/A 2-Channel Amplifier 200w total power bridged 80w RMS per channelstereo Separate channel-level controls 20Hz20kHz, 110dB S/N ratio Line in RCA jacks, line out/through jacks Toroidal power supply: less than 0.04% THD Stable into 2 ohm loads Bridging switch for high power mono amplification 5-way binding post speaker outputs 16 1/2'' x 2 1/4'' x 11 1/2''. 0 reviews |
 |
7 -Kramer 903 2-Channel Amplifier The 903 is a high performance integrated personal stereo amplifier for unbalanced stereo signals. It allows selection between four inputs and delivers a speaker output of 10 watts RMS power per channel into a 4 ohm load. 0 reviews |
 |
8 -Bose Lifestyle SA-3 2-Channel Amplifier The Bose SA-3 stereo amplifier works with your Lifestyle system and Bose speakers to bring music to an additional room in your home, or even outdoors. Enjoy jazz on the patio while the kids watch a movie in the den. At the same time, from the same Lifestyle system. The amplifier is easy to install, and you can even connect multiple amplifiers seamlessly to one Lifestyle system for up to 14 additional areas of sound indoors or out. You can control your music easily in each additional area with a dedicated Lifestyle expansion remote control (sold separately). 0 reviews |
 |
9 -Bose Lifestyle SA-2 2-Channel Amplifier Our SA-2 stereo amplifier works with your Lifestyle® system and Bose® speakers to bring music to an additional room in your home, or even outdoors. Enjoy jazz on the patio while the kids watch a movie in the den. At the same time, from the same Lifestyle® system. Only Bose delivers this unique blend of performance, elegance, simplicity and expandability so you can enjoy a whole-home entertainment experience unlike any other. 0 reviews |
 |
10 -Crown XS900 2-Channel Amplifier 2 Channels, Bridgeable, Frequency Response: 22 Hz - 22000 kHz, SNR: 108 dB... 0 reviews |
 |
11 -Crown I-T6000 2-Channel Amplifier Touring sound. Earth-shattering performance. I-Tech's patented class-I technology is the number one choice of touring professionals worldwide. 0 reviews |
 |
12 -Niles SI-2125 2-Channel Amplifier While traditional power amplifiers work well in traditional stereo systems, home theater and multi-room systems require an amplifier to do more than just drive speakers. These systems require a more modern approach, one that offers greater flexibility and performance. Niles Systems Integration Amplifiers deliver exceptional sound quality, tested reliability, and are designed to integrate many different components into a cohesive system. These amplifiers offer unique features that solve common custom installation problems and make exciting new system configurations possible. 0 reviews |
 |
13 -Pyle PYX3X Amplifier Frequency Response: 20 Hz - 20000 kHz, SNR: 90 dB... 0 reviews |
 |
14 -Adcom GFA-5400 2-Channel Amplifier 2 Channels, Bridgeable, RMS Power per Channel: 200 W @ 4 Ohm / 125 W @ 8 Ohm, Frequency Response: 20 Hz - 20 kHz, SNR: 100 dB...
1 reviews
|
 |
15 -ButtKicker BKA1000-4A Amplifier We are extremely pleased to introduce the newest addition to the ButtKicker family of products - the ButtKicker Power Amplifier. Designed specifically to power the ButtKicker LFE and Concert, the BKA1000-4A is an incredible value, chock full of features designed to make the installation and operation of the ButtKicker easier and more affordable. And because it comes in either 120v or 240v it can be used around the world. 0 reviews |
 |
16 -Pyle pyp1 Amplifier Frequency Response: 5 Hz - 30 kHz... 0 reviews |
 |
17 -Crown MA-5002VZ 2-Channel Amplifier Macro-Tech amplifiers are protected against shorted, open or mismatched loads; overloaded power supplies; excessive temperature; chain destruction phenomena; input overload damage; and high-frequency blowups. They also protect loudspeakers from input/output DC and turn-on/turn-off transients... 0 reviews |
 |
18 -Rolls RDB109 1-Channel Amplifier The RDB109 Is An Audio Distribution Device With A Single Balanced XLR Input, Distributed Via Isolation Transformers To Ten Balanced XLR Outputs. It Is Intended For Professional Audio Applications Such As Television and Radio Where a Single Source Needs to Be Distributed To Several Cameras or Recorders. Features: Balanced Female XLR Input: Ten Transformer Balanced Male XLR Outputs: Docking Bay For Addition Of Rolls Mic Preamp Accessories. 0 reviews |
 |
19 -Pyramid Pa105 Amplifier Frequency Response: 80 Hz - 20 kHz, SNR: 60 dB... 0 reviews |
 |
20 -Crown CTs 8200 8-Channel Amplifier 8 Channels, Bridgeable, Frequency Response: 20 Hz - 20000 kHz, SNR: 100 dB... 0 reviews |
 |
21 -Channel Vision A4601 Amplifier 0 reviews |
 |
22 -Rolls MP13 Mini Microphone 1-Channel Amplifier The MP13 is a single channel microphone preamp that is designed to provide a small, simple, and inexpensive solution for a variety of applications. The unit has both XLR and 1/4" inputs and outputs, and a single gain control with a clip indicator. Phantom powering (+36V) is included for use with a condenser microphone. The 1/4" output is specially designed for use as either a mono unbalanced output, or a stereo headphone output. 0 reviews |
 |
23 -Furman SP-20AB 2-Channel Amplifier The SP-20AB Stereo Power Amplifier is a unique and economical 20 watt per channel stereo amplifier. Its toroidal transformer delivers ultra-quiet performance, making it ideal for recording studio applications. The SP-20AB may be operated in any of three modes as selected by a rear-panel switch: normal stereo, two channel mono, or single channel (bridged) mono. The latter mode allows a power output of 40 watts provided the load is 8 or more ohms. 0 reviews |
 |
24 -Crown CTS1200 2-Channel Amplifier The Crown CTs-1200 is a 2-Channel power amplifer housed in a 2-space rackmount frame, offering power levels and features meant to serve fixed installation sound applications. This amplifier is notable for a completely independent array of switches and indicators for each channel, including high and low impedance operation , input sensitivity, high pass filters, and an advanced level of well designed overload protection circuitry. 0 reviews |
 |
25 -BreatheAudio BA-2430S 2-Channel Amplifier The BreatheAudio Elevate Power Unit creates high-fidelity audio output that flows through your entire home. Experience pure, clean sound from two audio sources in up to four zones in your home. 
1 reviews
|
 |
26 -AudioSource Amp Three 2-Channel Amplifier 150 watts per channel (8 ohms). 400 watts mono bridged. AB speaker switching. Auto-On signal sensing circuit. Left and right channel level controls. Line output jacks. Toroidal power supply. Stable into 2 ohm loads.
2 reviews
|
 |
27 -BreatheAudio BA-200 2-Channel Amplifier 2 Channels, Frequency Response: 20 Hz - 20 kHz... 0 reviews |
 |
28 -Kramer VP-200 Amplifier The Kramer VP-200 is a high performance 1:2 distribution amplifier for VGA signals. It accepts one input provides correct buffering and isolation and then distributes the signal to two identical outputs using high-density 15 pin D connectors. Video bandwidth exceeding 425MHz ensures that the VP-200 remains transparent even at high-resolution VGA modes such as XGA. It is ideal for dual monitor applications or presentation systems requiring a local monitor and a large screen display device such as a projector. A 12V power supply is included. 0 reviews |
 |
29 -Nady Systems XA-1100 2-Channel Amplifier 2 Channels, Bridgeable, RMS Power per Channel: 730 W @ 2 Ohm / 500 W @ 4 Ohm / 300 W @ 8 Ohm, Frequency Response: 20 Hz - 20 kHz, ... 0 reviews |
 |
30 -CSi/Speco PBM-120 3-Channel Amplifier Music on hold with separate level control, voice activated mute Telephone interface, auto-summing speaker outputs: 25/70v and 4/8/16 ohm, stereo auxiliary inputs 600 ohm telephone line input. 0 reviews |
 |
31 -Monster Cable Signature MPA 5150 SS 5-Channel Amplifier The Signature MPA 5150, Monster Home Theatre Music 5-Channel Reference Power Amplifier represents a breakthrough in performance and affordability for those who are passionate about movies and music. It includes special enhancements for audiophiles and videophiles who appreciate minute attention to detail, elegant design and a peak performance from their home theater system. It’s all the power you need in a highly advanced but attractive and convenient chassis. 0 reviews |
 |
32 -CTG (41066) 2-Channel Amplifier Distribute analog video signals from a single A/V source to multiple televisions, monitors and receivers with this powerful distribution amp. Supporting cable runs up to 150ft, these amps can be daisychained together for an unlimited number of television connections without degradation to the picture quality. Unity gain technology ensures that the output signal is as clean as the input signal. High-quality and stable amplification to eliminate the poor picture and sound quality you get by simply using Y-cables. Use these amplifiers with video sources like DVD players, satellite receivers and other video sources. Also useful for distributing audio sources like CD players and tuners for multi-zone sound systems. Perfect for nightclubs, banks, airports, boardrooms, and schools. The uses are endless!... 0 reviews |
 |
33 -Rolls HA43 Amplifier The HA43 Is For Expanding Or Generating Headphone Channels. It Has A 1/4" Stereo Input, 4 Volume Controls, 4: 1/4" Stereo Output Jacks and Is Powered By An AC Adaptor (Included). The HA43 Has A 20Hz-20kHz Response, and Its Small Size, and Overall Design Make It Very Easy To Use. 0 reviews |
 |
34 -Monster Cable MPA3250SS 3-Channel Amplifier Ultra High Performance, 3-Channel Power Amplifier with integrated Monster Power® PowerCenter design to complete the MonsterPower "backbone" of stable voltage, Clean Power and now, Monsterous amplification. Features Monster-Mirrored Amplifier Technology, laboratory-grade digital power meters and maximum juice to deliver ultimate clarity, dynamic range and resolution to your home theater and audio system... 0 reviews |
 |
35 -Crown I-T4000 2-Channel Amplifier Touring sound. Earth-shattering performance. I-Tech's patented class-I technology is the number one choice of touring professionals worldwide. 0 reviews |
 |
36 -Niles SI-275 2-Channel Amplifier 2 Channels, RMS Power per Channel: 100 W @ 4 Ohm / 75 W @ 8 Ohm... 0 reviews |
 |
37 -SpeakerCraft BB50 2-Channel Amplifier The BB50 offer budget solutions for less demanding installations. These amplifier include the necessary features needed for flexible, reliable custom installation. Custom friendly features include multiple turn-on modes, independent level controls for each channel and pass through outputs. 0 reviews |
 |
38 -Channel Vision CVT-40BID Amplifier 0 reviews |
 |
39 -Pico Macom MPA-HD Amplifier 0 reviews |
 |
40 -Sima VS-HD14 Amplifier The VS-HD14 Distribution Amplifier provides the quality you’d expect from Sima, for home and professional installs. Featuring 4 outputs and signal boosting power for long cable runs, this HDMI Distribution Amp is ready for duty in home theaters, restaurants, churches, retail outlets, trade shows...the list goes on and on. The VS-HD14 has signal indicator lights, as well as digital audio outputs for feeding into a receiver or amplifier. It can be the cornerstone to your multi-monitor needs. 0 reviews |
 |
41 -CSi/Speco PBM-30 2-Channel Amplifier Auto mute function-music on hold telephone interface Bass and treble tone controls Frequency response 50Hz-15kHz Inputs: mic/aux/tel, 19'' rack or wall mount. 0 reviews |
 |
42 -CSi/Speco PBM-60 3-Channel Amplifier Music on hold with separate level control, voice activated mute Telephone interface, auto-summing speaker outputs: 25/70v and 4/8/16 ohm, stereo auxiliary inputs 600 ohm telephone line input. 0 reviews |
 |
43 -Niles SI-245 2-Channel Amplifier 2 Channels, RMS Power per Channel: 70 W @ 4 Ohm / 45 W @ 8 Ohm... 0 reviews |
 |
44 -Nady Systems 3WA-1700 2-Channel Amplifier 2 Channels, RMS Power per Channel: 450 W @ 4 Ohm... 0 reviews |
 |
45 -Niles TVA-50 2-Channel Amplifier 2 Channels, RMS Power per Channel: 75 W @ 4 Ohm / 50 W @ 8 Ohm, SNR: 94 dB... 0 reviews |
 |
46 -CSi/Speco PMM-120A 1-Channel Amplifier The Speco PMM-120A is a UL LISTED amplifier. It has 120 Watt RMS; AC 120V, 50/60Hz; 50-15kHz; 6 MIC Inputs, 4 XLR Connectors (1.0mv/250 Ohms); 1 Aux Input (200mV 47K), 1 Telephone (0.1-1V 600 ohm); 4/8/16 ohms & 75/25 V Line Inputs, Music on Hold Features, Separate Bass and Treble Controls... 0 reviews |
 |
47 -Micromega 120A 5.1-Channel Amplifier The Model 120 is a high performance audio distribution amplifier with a single high impedance input and four low impedance outputs, all electronically servo-balanced. The 120's transformerless circuits are designed for wide, flat frequency response free from ringing or overshoot, making it ideal for distribution of SMPTE time code as well as audio. Each output has its own amplifier and level control for maximum versatility and isolation. The sturdy steel chassis may be used stand-alone or rackmounted, singly or in pairs. 0 reviews |
 |
48 -Crown CTS4200 4-Channel Amplifier Crown's new CTs series of power amplifiers are remarkable for their loud, punchy sound; sustained, tight bass; and superior protection against overheating and overload. This paper explains the design features behind those advantages. After reading this information, you'll know why Crown CTs amps sound better than the competition. CTs amplifiers can provide large amounts of power into various loads, such as 2, 4, 8 ohms and 70V. With most power amps, the maximum output power tends to drop as the load impedance increases. But with the CTs series, the power stays the same at almost any impedance. 0 reviews |
 |
49 -Pico Macom CA-30/870AR 2-Channel Amplifier 2 Channels... 0 reviews |
 |
50 -Bogen Communication HTA250A Amplifier The Bogen HTA-250A Power Amplifier is a high-performance unit employing state-of-the-art Power MOSFET technology. The unique charac-teristics of Power MOSFETS make them ideally suited to power amplifier design, providing far superior performance and reliability compared to other types of transistors. They offer high effi-ciency, reduced heat, simpler overall design, reduced size and weight. 0 reviews |
 |
51 -Bogen Communication GS100 Amplifier The BO-GS100 is designed to meet the rigorous requirements of todays sophisticated sound systems. Combines unique and useable features with ultra-high reliability and professional performance. Designed with the sound contractor in mind, they provide unparalleled flexibility and versatility, without the need for add-on modules. 0 reviews |
 |
52 -Bogen Communication Classic 60 Amplifier Frequency Response: 20 Hz - 20 kHz, SNR: 70 dB... 0 reviews |
 |
53 -Channel Vision A1260 2-Channel Amplifier 2 Channels, RMS Power per Channel: 70 W @ 4 Ohm / 60 W @ 8 Ohm, Frequency Response: 20 Hz - 20 kHz... 0 reviews |
 |
54 -Nady Systems SPA 850 2-Channel Amplifier Offering top power, superior performance and full professional operating features in a roadworthly compact chassis, the SPA Series are perfect for even the most demanding sound reinforcement installation and touring applications. 0 reviews |
 |
55 -Nady Systems SPA 1400 Amplifier 0 reviews |
 |
56 -Crown XTi 4000 Amplifier The XTi Series of Crown amplifiers are professional tools designed and built for portable PA applications. The series includes three models which are identical except for output power: XTi 1000, 2000 and 4000. All are rugged and lightweight, and offer unmatched value in their class. 0 reviews |
 |
57 -Hisonic AV-2620T 5-Channel Amplifier 5 Channels, Frequency Response: 20 Hz - 20 kHz, SNR: 80 dB, With Remote Control... 0 reviews |
 |
58 -Crown XLS 802 D Amplifier XLS Series amplifi ers are professional stereo power amplifi ers engineered to meet demanding audio requirements—reliably and within budget. Every XLS Series amplifi er is backed by Crown’s unequaled Three-Year, No-Fault,Fully Transferable Warranty that covers everything.
1 reviews
|
 |
59 -Niles SI-1230 12-Channel Amplifier 12 Channels, Bridgeable, RMS Power per Channel: 37 W @ 4 Ohm / 30 W @ 8 Ohm... 0 reviews |
 |
60 -AudioSource AMPSUB210 Amplifier 0 reviews |
 |
61 -AudioSource DHAMP210 2-Channel Amplifier 2 Channels, RMS Power per Channel: 250 W @ 4 Ohm / 160 W @ 8 Ohm, Frequency Response: 5 Hz - 35 kHz, SNR: 100 dB... 0 reviews |
 |
62 -Crown XLS-202 2-Channel Amplifier XLS Series amplifiers are professional stereo power amplifiers engineered to meet demanding audio requirements reliably and within budget. 0 reviews |
 |
63 -Crown Xs700 Amplifier RMS Power per Channel: 750 W @ 4 Ohm / 450 W @ 8 Ohm, Frequency Response: 20 Hz - 20 kHz, SNR: 97 dB... 0 reviews |
 |
64 -Yamaha P2500S Amplifier RMS Power per Channel: 620 W @ 4 Ohm / 500 W @ 8 Ohm, Frequency Response: 20 Hz - 50 kHz, SNR: 100 dB... 0 reviews |
 |
65 -Alesis RA300 Amplifier With their rugged construction, striking good looks , and a long list of features, the RA series will quickly find a home in project and commercial recording studios, broadcast and post-production control rooms around the world. 0 reviews |
 |
66 -Vestax VDA1000 2-Channel Amplifier With the digital amplification technology offering significant lower heat dissipation, the VDA-1000 has combined the warmth of analog sound and high power output within its compact and portable design. 0 reviews |
 |
67 -AudioSource DHAMP310 2-Channel Amplifier 2 Channels, Bridgeable, RMS Power per Channel: 450 W @ 4 Ohm / 900 W @ 8 Ohm, Frequency Response: 20 Hz - 20 kHz, SNR: 100 dB... 0 reviews |
 |
68 -Crown XLS5000 Amplifier The XLS Series of power amplifiers from Crown represents a new era in affordable, quality power amplification. The line consists of four models in a uniform, rugged 2U chassis, incorporating the best of tried-and-true design principles and innovative features.XLS Series amplifiers are professional stereo power amplifiers engineered to meet demanding audio requirements reliably and within budget Plus. 0 reviews |
 |
69 -LOUD Technologies Juice J-2500 Amplifier RMS Power per Channel: 1400 W @ 2 Ohm / 750 W @ 4 Ohm / 575 W @ 8 Ohm, Frequency Response: 25 Hz - 25 kHz, SNR: 100 dB... 0 reviews |
 |
70 -LOUD Technologies J1400 2-Channel Amplifier The front panel grill of the J-1400 provides the outward conduit for the dual varispeed, back-to-front airflow fan cooling system, in which the fans speed up relatively as the amp's output power and heat factor increases, to maintain consistent cooling. The large and clear LED indicators include an Overload light, and there is a rear panel switch to engage or defeat the limiting protection circuitry. 0 reviews |
 |
71 -CSi/Speco PBM-15 2-Channel Amplifier UL Listed. Our two channel contractor series mixer/amplifier is a 15 watt amplifier. It features an auto mute function, music on hold output with separate level control (600 ohm line and one watt 8 ohm), 600 ohm telephone line input with level control, bass/treble to our two channel contractor series mixer/amplifier is a 15 watt amplifier. It features an auto mute function, music on hold output with separate level control (600 ohm line and one watt 8 ohm), 600 ohm telephone line input with level control, bass/treble tone controls, front panel level controls, and manual muting contacts. In addition to the telephone line input, this unit accepts inputs from two sound sources. Each source utilizes a microphone input (terminal strip). Source 1 also offers the option of an auto summing stereo auxiliary RCA input. Outputs include a choice of 4, 8, and 16 ohm as well as 70 and 25 volt line outputs. 0 reviews |
 |
72 -Monster Cable MPA2250SS 2-Channel Amplifier Technologically and aesthetically matched to other Monster Power components, these power amplifiers are powerful. Attractive. Reliable. Advanced. And backed by the Monster brand name and reputation--with our hallmark higher-grade components and high-end design. Based on the success of our Home Theatre PowerCenters, the 2250 was constructed to deliver enough dedicated, ultra high performance amplification necessary to reproduce movies and music sound as accurately as the artists intended you to hear it. 0 reviews |
 |
73 -CTG (40396) Amplifier 0 reviews |
|
74 -American Audio V-1001 Amplifier 0 reviews |
|
75 -Spytown V210DA Amplifier 0 reviews |
|
76 -Aiphone DMA2120 4-Channel Amplifier 4 Channels, Frequency Response: 20 Hz - 30 kHz, SNR: 75 dB... 0 reviews |
|
77 -General Electric GESKTS25016 Amplifier 0 reviews |
 |
78 -Channel Plus MDS-6A Amplifier The MDS-6A Music Distribution Kit #2 includes the MDS-6A master, six MCS-1A source/volume controllers, and six model 2171 IR emitters. The MCS-1A is a single gang Decora style controller with volume, mute, and source selection buttons. The keypads are back-lit and are supplied with white and almond bezels. The IR targets allow complete control of the connected music source. 0 reviews |
← Back to Top Products
About Us |
Blog |
Coupons |
Mpire Labs |
Researcher |
Press Room |
CPA Widgets
Top Products | Jobs | Privacy Policy | Terms of Use | Contact Us
Top Products | Jobs | Privacy Policy | Terms of Use | Contact Us